HYDRAULIC PRESS-62
The hand press is designed mainly for pressing cuvettes...
Dental laboratories
CIRCULATORY MINI SANDBLASTER O-177
The sandblaster is meant especially for cleaning casts in dental laboratories. Sandblasting is performed with sand from the internal cartridge, which circulates inside the sandblaster, and the dust created as a result is sucked into the connected exhaust (or an extractor). The sandblaster has a fixed horizontal blast tube on its front side.
ADVANTAGES OF THE MINI SANDBLASTER:
1. Small occupied handling area on a work table.
2. Strong inside lighting with cold light.
3. Supplied with a control tap for operating output.
4. The viewing window is protected with a metal net.
5. Access for handling is enabled through the lift-off viewing window
or through the right hand muff.
6. Connecter to an extractor with common start.
TECHNICAL CHARACTERISTICS:
| Power supply | 230 V, 50 Hz, 2300 VA [with the extractor] | |
| Compressed air connection | 4 to 8 bars, 160 l/min | |
| Standard internal cartridge | 1.5 kg corundum 315–400 μm | |
| Alternative internal cartridge | 1.5 kg corundum 200–250 μm | |
| Dimensions (height, width, depth) | 272 x 220 x 270 mm | |
| Weight of the sandblaster without cartridge | 4.6 kg |
VACUUM AGITATOR V-184
The agitator enables first-rate preparation of gypsum and cement compounds...
DENTAL SAW D-188
The saw is intended for parallel cutting of the dental gypsum models...
SMALL VIBRATOR V-95
The vibrator is intended namely for application in dental laboratory...
CASTING APPARATUS TRYSTOLIT L-136
This is a table-top semi-automatic vacuum-pressure casting apparatus...
MODEL TRIMMER O-280M
The instrument is used to grind the gypsum casts...
SEDIMENT SEPARATOR O-101
The sediment separator is a device which, in a dental laboratory...
THERMAL COMPRESSIVE POLYMERIZATION UNIT
T-152
A device, which enables laboratory polymerization...
CIRCULATORY MINI SANDBLASTER O-177
The sandblaster is stipulated especially for cleaning casts...
LARGE BRASS FOUR-PART FLASK K-85
The flask is specified as essential equipment for dental laboratories...
BRACKETS FOR FLASKS T-207 AND F-201
The bracket enables technological clasping of a single flask...
DIGESTER D-114 (DS-114)
The digester enables placement of two dental furnaces…
0.jpg)
LABORATORY BENCH L-231
Laboratory bench is a complex workstation with…
STEAM CLEANER P – 216
The steam cleaner is designed for prosthetic dental laboratories...
5.jpg)
AMALGAM GAUGE M-535
This two-volume gauge for preparation of amalgam …
Pragodent 2009
Trystom company again presented itself at the 17th International Dental Fair PRAGODENT...
Pasteurova 67/15
Olomouc, 77200
Czech Republic
IN49609408
FAX+420 585 225 262
TEL+420 585 225 262
E-MAILtrystom@trystom.eu
OBĚHOVÝ MINIPÍSKOVAČ | www.trystom.eu
Select your language
cz
,
en