HYDRAULIC PRESS-62
The hand press is designed mainly for pressing cuvettes...
Dental laboratories
STEAM CLEANER P-216
The steam cleaner is designed for prosthetic dental laboratories where it enables quality cleaning of gypsum moulds from residues and cleaning of metal bases for application of ceramic dentures. Steam is developed in small volume in a stainless steel boiler with automatic refilling of distilled water from the storage container. Once the device has been connected to compressed air distribution, steam cleaning and drying with preheated air can be done with one gun.
ADVANTAGES OF THE STEAM CLEANER:
1. Small volume of heated water – fast heating, low energy consumption (energy saving in the stand-by mode is 56% compared to competitive devices).
2. Automatic water refill while in operation – the device need not be shut down for water refilling.
3. Integrated blowing with compressed air – enables using one gun for steam cleaning as well as for drying and cleaning with compressed air.
4. Can be placed on a desk or hung on a wall (using installation set).
5. All parts are manufactured from stainless steel or non-metallic materials.
TECHNICAL CHARACTERISTICS:
| Power supply | 230 V, 50 Hz, 2200 VA |
| Steam temperature | 145°C |
| Steam pressure | 4 bar |
| Steam preparation time from cold | max. 6 min. |
| External dimensions (height, width, depth) | 350 x 350 x 190 mm |
| Instrument weight | 13 kg |
| El. installation of class I with protection through resetting |
ANOTHER DEVICES
VACUUM AGITATOR V-184
The agitator enables first-rate preparation of gypsum and cement compounds...
DENTAL SAW D-188
The saw is intended for parallel cutting of the dental gypsum models...
SMALL VIBRATOR V-95
The vibrator is intended namely for application in dental laboratory...
CASTING APPARATUS TRYSTOLIT L-136
This is a table-top semi-automatic vacuum-pressure casting apparatus...
MODEL TRIMMER O-280M
The instrument is used to grind the gypsum casts...
SEDIMENT SEPARATOR O-101
The sediment separator is a device which, in a dental laboratory...
THERMAL COMPRESSIVE POLYMERIZATION UNIT
T-152
A device, which enables laboratory polymerization...
CIRCULATORY MINI SANDBLASTER O-177
The sandblaster is stipulated especially for cleaning casts...
LARGE BRASS FOUR-PART FLASK K-85
The flask is specified as essential equipment for dental laboratories...
BRACKETS FOR FLASKS T-207 AND F-201
The bracket enables technological clasping of a single flask...
DIGESTER D-114 (DS-114)
The digester enables placement of two dental furnaces…
0.jpg)
LABORATORY BENCH L-231
Laboratory bench is a complex workstation with…
STEAM CLEANER P – 216
The steam cleaner is designed for prosthetic dental laboratories...
5.jpg)
AMALGAM GAUGE M-535
This two-volume gauge for preparation of amalgam …
Pragodent 2009
Trystom company again presented itself at the 17th International Dental Fair PRAGODENT...
Pasteurova 67/15
Olomouc, 77200
Czech Republic
IN49609408
FAX+420 585 225 262
TEL+420 585 225 262
E-MAILtrystom@trystom.eu
Parní čistička P – 216 | www.trystom.eu
Select your language
cz
,
en